Powerspark Electronic Ignition Kit for Bosch 4 Cylinder Left Hand Points Distributor


K9 - Powerspark Electronic Ignition Kit for Bosch 4 Cylinder Left Hand Points Distributor

Fits 4-cylinder Bosch vacuum-advance & centrifugal-advance distributors with one-piece, left-hand pivot pin points.

Bosch distributors are either 1 piece or 2 piece construction, and have Left Hand or Right Hand Points Sets.

This kit is designed to replace the points and condenser inside Bosch 4 cylinder distributors with a one piece Left Hand Side Points Set. 

Distributors of this type can have the following numbers:

0 231 115 045, 0 231 115 093, 0 231 146 077, 0 231 170 122, 0 231 170 196, 0 231 170 307, 0 231 170 308, 0 231 170 317, 0 231 170 328, 0 231 180 008, 0 231 180 013, 0 231 186 023, 0 231 186 023, 71BB-12100 BHA (Ford), 751-12100 BA (Ford), 751F-12100-BA (Ford), 77BF 12100 FB (Ford)

It is suitable for both vacuum advance and centrifugal advance units. 

It is a complete kit to convert your car to electronic ignition. Fitting is easy and instructions are included with the packaging, as well as available online.

Electronic ignition will give your classic car better starting and smoother running.

Powerspark Electronic Ignition Kit - Replacement baseplate with electronic module, trigger ring and all wiring.


- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free


- To be used with a coil resistance above 1.5 ohms only
- We recommend our silicon coated carbon core HT Leads instead of copper 

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free. 

Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.

Add to Cart:

  • Model: K9
  • Shipping Weight: 0.1kgs
  • 271 Units in Stock

Ask a Question About This Product
Do you like this product? Share it with your friends:

Copyright © 2018 Powerspark Website Support. Powered by www.simonbbc.com