Powerspark Electronic Ignition Kit for early Ford E93A Engine with YE12100B Distributor Positive Earth

£44.95

K39pp - Powerspark Electronic Ignition Kit for early Ford E93A Engine with YE12100B Distributor
 
This ignition kit is designed to replace the points and condenser inside the YE12100B Distributor used in the early Ford E93A engine.
 
Please note this is a POSITIVE EARTH kit for positive earth vehicles.
 
It is suitable for early Ford Anglias, Populars and Prefects.
 
The YE12100B Distributor was used from 1935 to 1959, in the following vehicles:
 
Ford Model 19, Y (1932-37)
Ford Model 20, C & CX (1934-37)
Ford Eight, Model 7Y (1937-39)
Ford Ten, Model 7W (1937-39)
Ford Anglia, Model E04A (1939-48), Model E494A (1949-53)
Ford Prefect, Model E93A Side Valve (1939-48), Model E493A (1949-53)
Ford Popular, Model 103E/104E (1953-59)
Ford 5 cwt. Van, Model E04C (1940-48) and Model E494C (1949-54)
Ford 10 cwt. Van, Model E83W (1938-57)
Ford Estate Car, Model E83W (1949-57)
Ford Pick-up, Model E83W (1950-57)
 

A Powerspark Electronic Ignition Kit is everything you need to convert your car to electronic ignition.

Fitting is easy and instructions are included with the packaging, as well as available online.

Works from 6 volt to 12 volt applications.

Electronic ignition will give your classic car better starting and smoother running.

Benefits:

- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free

Requirements:

- Our standard kits are to be used with a coil resistance above 1.5 ohms
- Our High Energy kits are to be used with a coil resistance below 1.4 ohms
- Not to be used with copper HT Leads. 

We recommend our silicone HT leads with electronic ignition. Copper HT leads can limit the life of the electronic kit.

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free. 

Each kit comprises a metal bracket where the electronic module is mounted, trigger ring and all wiring. The new electronic bracket mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. 

Do I need a High Energy Electronic Ignition Kit?

Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit. 

Our High Energy Electronic Ignition Kits are designed to be used with a lower coil resistance of less than 1.4ohms, suitable for a vehicle that requires a more accurate and powerful spark.

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.


Add to Cart:

  • Model: K39PP
  • Shipping Weight: 0.1kgs
  • 17 Units in Stock

Ask a Question About This Product
Do you like this product? Share it with your friends:

Copyright © 2018 Powerspark Website Support. Powered by www.simonbbc.com